Selecting the number of bolts in the group – Checkline TI-MINIMAX User Manual

Page 109

MINI-MAX Ultrasonic Bolt Tension Monitor

Note: Be sure to include a note that describes and references the Field

Calibration data and bolt.

1) Use the

UP and DOWN arrow keys to scroll through the new Group

List Items until NOTE is highlighted.

2) Press the

ENTER key to activate the Alpha Edit Box.

3) Use the

UP, DOWN, LEFT, & RIGHT arrow keys to highlight the

appropriate alpha characters.

4) Press the

ENTER key to select a character and advance to the next

field of the

Group Note.

5) Use the

CLR key to backspace if necessary.

6) Repeat steps

3 - 5 until the Group Note is completed.

7) Press the

OK key to save the Group Note and return to the Group List

Items menu, or ESC to cancel entering the Group Note.

Selecting the Number of Bolts in the Group

Note: In this example the minimum requirement of 3 sample bolts will be

used.