Checkline TI-MINIMAX User Manual

Page 145

Text mode
Original mode

MINI-MAX Ultrasonic Bolt Tension Monitor

Setting the Approximate Length using the Hot Menus

1) Press the

MEAS key once to activate measure menu items. Press the

MEAS key multiple times to move right and the ESC key multiple times

to move left, until the

ALEN cell is highlighted.

2) Press the

ENTER key to display the Digits Edit Box.

3) Press the

UP and DOWN arrow keys to scroll the highlighted value.

4) Press the

LEFT and RIGHT arrow keys to scroll the digit locations.

5) Repeat steps

3 & 4 until the ALEN value is correctly displayed.

Press the

OK key to return to the measurement screen, or ESC to

cancel entering the

ALEN.

The user can also access and set the approximate length from the tabbed
menus. However, this method is more tedious than making the adjustments
using the Hot Menus. The procedure using the tabbed menus is outlined below: