Checkline TI-MINIMAX - Manual (Page 32)

Dakota Ultrasonics
26
Delete All Groups: This function provides the user with the ability to delete all
groups currently stored in memory. Refer to section 14.5 for further info.
4.10 UTIL (utilities) – Menu
Temp Mode: This sub menu item enables the user to select the automatic
temperature compensation mode (manual, semi-auto, and auto). This feature is
only available to those units purchased with the automatic temperature
compensation option and probe. Note: Contact Dakota for information on
upgrading the MINI-MAX. Refer to Chapter 9 for further info.
Alarm Status: Toggles alarm mode on or off. Refer to section 13.2 for further
info.
Alarm LO Limit: Gives the user the ability to set the LO tolerance parameter. If
the measurement falls below this value, a red light will illuminate. Refer to section
13.2 for further info.
Alarm HI Limit: Gives the user the ability to set the HI tolerance parameter. If
the measurement exceeds this value, a red light will illuminate. Refer to section
13.2 for further info.
4.11 XFER (transfer) – Menu
Backup Setups: Enables the user the ability to backup the setups currently
stored in the MINIMAX to a PC via RS232 port. Refer to the help section of the
MINIMAXview software for a complete electronic manual.
Restore Setups: Enables the user the ability to restore the setups currently
saved on a PC to a MINI-MAX via RS232 port. Refer to the help section of the
MINIMAXview software for a complete electronic manual.