Checkline TI-MINIMAX - Manual (Page 143)

MINI-MAX Ultrasonic Bolt Tension Monitor
the Length is known, use the digits edit box to enter the value and save
time.
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move right and the ESC key multiple times
to move left, until the DELAY cell is highlighted.
2) Press the UP, DOWN, LEFT, and RIGHT arrow keys to scroll the
highlighted value.
3) Alternatively , press the ENTER key to display the Digits Edit Box.
4) Press the UP and DOWN arrow keys to scroll the highlighted value.
5) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
6) Repeat steps 4 & 5 until the DELAY value is correctly displayed.
7) Press the OK key to return to the measurement screen, or ESC to
cancel entering the DELAY.
Adjusting the Width using the Hot Menus
Note: The width acts like a zoom on a camera. Therefore, adjust the width
to the desired view.