Checkline TI-MINIMAX User Manual

Page 64

Text mode
Original mode

Dakota Ultrasonics

25) Press the

ENTER key and the length value currently being measured,

will appear in the

ULTRASONIC LEN field.

26) Use the

UP and DOWN arrow keys to scroll through the One Point

Zero List Items until CALC ZERO is highlighted.

27) Press the

OK key to set the Zero Value and return to the menu screen,

ESC to cancel entering the Zero Value. Notice the delay value has

been inserted in the

Zero Value field.

28) Finally, press the

MEAS key to return to the measurement screen and

begin taking readings.

Typically when the zero value is off and the hardware has not changed, it’s
because the temperature of the bolt has changed. In this case, the zero value