Checkline TI-MINIMAX - Manual (Page 57)

MINI-MAX Ultrasonic Bolt Tension Monitor
12) Use the UP and DOWN arrow keys to scroll through the sub menu
items until QUANTITY is highlighted.
13) Use the LEFT and RIGHT arrow keys to scroll the quantity options until
the ELONG option is displayed.
14) Press the MENU key multiple times to tab right and the ESC key
multiple times to tab left until the AUTO menu is highlighted and
displaying the submenu items.
15) Use the UP and DOWN arrow keys to scroll through the sub menu
items until APROX LEN is highlighted.
Note: This is the approximate physical length of the fastener or bolt. This
tells the MINI-MAX where to turn on the receiver and look for an echo. The
area scanned will be +/- 5% from the approximate length.
16) Press the ENTER key to display the Digits Edit Box.
17) Press the UP and DOWN arrow keys to scroll the highlighted value.
18) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
19) Repeat steps 16 & 17 until the APPROX LEN value is correctly
displayed.