DVR systems PSS ENG - Manual (Page 97)

91
Please go to chapter 3.7.5.2 Option to set refresh interval.
7 It is the first alarm item you set in Figure 3-135.
So, in Figure 3-136, you can see the external alarm information. Blue light
means there is an alarm.
Please go to chapter 3.7.5.2 Option to set refresh interval.
8 Device IP.
Figure 3-136
In Figure 3-136, double click mouse, you can go to alarm record interface. Please refer to
chapter 3.7.2 Alarm for alarm record interface information.
Once there are HDD alarm and encode/decode alarm, the interface is shown as below. See
Figure 3-137.You can see there is HDD error, HDD is full and the encode/decode alarm.
Figure 3-137
3.10 Full Menu
The full menu interface is shown as below. See Figure 3-138.
Figure 3-138
3.10.1 Modify Password
Please refer to chapter 3.7.5.1.
3.10.2 Device
It has the following sub-menu. See Figure 3-139.
 Device management: Please refer to chapter 3.8.5.8.
 Health report: Please refer to chapter 3.8.4.3.
 NVD manage: Please refer to chapter 3.8.5.9.
 NVD control: Please refer to chapter 3.8.4.2.
1 2 3 4
5
6
7
8