DVR systems PSS ENG - Manual (Page 20)

14
3 Local
record
When you click local record button, the system begins recording.
The recorded file is saved to system folder.
4 Capture
picture
You can snapshoot important video. All images are memorized in
system folder.
5 Audio
Turn on or off audio.(It has no relationship with system audio
setup )
6 Close
video Close video in current window.
3.6 Screen Display Mode
Screen display mode interface is shown as in Figure 3-11.
Figure 3-11
From the left to the right, there are video quality, real-time/fluent button, full-screen button and 1-
64 screen modes.
Note:
In full-screen mode or the window is maximized, sometimes you may notice the height and width
of small window can adjust according to the displayer.
3.7 Function Button
Function button is show as in Figure 3-12.
It consists of the six buttons: Task/Alarm/Playback/E-map/Configuration/Device local preview
output configuration.
Figure 3-12
3.7.1 Task
Click Task button, the interface is shown as below See Figure 3-13.
Here you can enable/disable the task or project item.
Pause/restore button: Once you enabled one task/project, system display pause button.
“ √ ” means current task/project is in progress.
1 2 3 4