DVR systems PSS ENG - Manual (Page 70)

64
Figure 3-89
Click modify button, the interface is shown as in Figure 3-90.
Please note, in modification mode, you can not modify project name.
 Monitor project mode: It includes two modes: schedule mode and tour mode.
 Schedule mode: In this mode, the monitor task will begin activated in the time you
specified.
 Tour mode: In this mode, you can specify the monitor task interval time. The system
will begin the task one by one according to the period you specified and in accordance
with the sequence you arranged. System will repeat the procedure again and again
once it completed the last task.
 Task name: Please select the task to be run.
 Start time: Please select the task start time (For schedule mode only).
 Interval: please select the task running time (For tour schedule mode only).
 Up and down button is to adjust the monitor task sequence.
Please click save button to exit.