DVR systems PSS ENG - Manual (Page 15)

9
3 Interface
Double click PSS icon , you can go to the login interface.
3.1 Login Interface
Login interface is shown as in Figure 3-1.
 User name: Input the user account
 Password: Please input corresponding password to log in.
 OK: Click this button, system can verify the account and then enter the software main
interface.
 Cancel: Click this button to exit login interface.
Note:
 If it is your first time to run the PSS program, default user name is admin and its password is
admin too. Admin is a super administrator and can not be removed. It can add, modify or
delete other user.
 For security reason, please modify your password after first log in.
 You can memory your password, so that when you can log in the next time, you do not need
to input user name and password. Please note this function is for your convenient only. Do
not enable this function in public PC.
Figure 3-1
3.2 Initialization Interface
Click OK button, system begins verifying user name and password and then go to the
initialization interface. See Figure 3-2.
Please note it may take a little bit longer to initialize decode card, please be patient.
If it is your first time to use PSS, please go to chapter 3.7.5.2 Option to implement setup.