DVR systems PSS ENG - Manual (Page 107)

101
E-map window can be displayed independently.
Double click the camera name in the E-map; you can enable real-time monitor function in the
video window.
When alarm occurs, corresponding node becomes flashing.
4.7 Log out
Please refer to chapter 3.10.8 or chapter 3.11.9 for log out information.
Click log out button, the interface is shown as below. See Figure 4-4. You need to input the
proper password and then click OK button to logout the PSS.
Figure 4-4
Now you can see system goes back to log in interface. See Figure 4-5. Current operation and
configuration all stopped. You need to input user name and password to log in. The record plan,
task and project, shortcut key, and right information are all for logged in user.
Figure 4-5