DVR systems PSS ENG - Manual (Page 68)

62
 New: Click it you can see an interface is shown as in Figure 3-. Here you can create a new
task.
 Modify: Modification interface is shown as in Figure 3-. Please note you can not edit task
name.
 Delete: You can click it to remove one task.
 Import: You can import task from specified XML file.
 Export: You can export current task to a XML file.
Figure 3-87
Task edit interface is shown as in Figure 3-88.
 Task Name: Please input task name here if you want to create a new task. Please note, if
you are going to edit the task. You can not modify the name.
 Window amount: Here you can input the window amount you want to see in the monitor
interface when you enabled current task.
 Window: Window serial number. It means the current monitor item is in which window.
 Camera name (can not be modified.) and camera ID: You can drag the channel name in the
device list section to the current column.
 Stay time(s): You can input stay value here.
 Preset: When you open the monitor, system can go to the specified preset. The default
preset value is N/A
 Bit stream type: if device supports extra stream, you can set the bit stream when open the
video.
 Monitor item: Here you can view task detail information. System begins task from number 1
to number 2 and then go on. You can use Up/Down button to adjust the monitor task
sequence.