DVR systems PSS ENG - Manual (Page 17)

11
Figure 3-4
 Section 1: Current display window. It is circled by a green boundary. For video control
information, please refer to chapter 3.5 Video control zone.
 Section 2: Screen display mode. From the left to the right, there are video quality, real-
time/fluency level, and full-screen and 1-64-window mode. Please refer to chapter 3.6 for
detailed information.
 Section 3: Function buttons. Here you can view the following buttons: Task (chapter 3.7.1),
Alarm (chapter 3.7.2), Playback (chapter 3.7.3), E-map (chapter 3.7.4), Configuration
(chapter 3.7.5) and Device preview video output configuration (Chapter 3.7.6.).
 Section 4: Right tool bar. Here you can view the five buttons: Device list (chapter 3.8.1).PTZ
direction (Chapter 3.8.2), PTZ advanced (chapter 3.8.3), Tool (chapter 3.8.4), Setting
Manage (chapter 3.8.5).
 Section 5: For general version, it is the device health status. System can update the device
information, disk status information; decode alarm, record and other general alarm status.
Double click to go to the alarm record interface. Please refer to chapter 3.9 for detailed
information. For IVS version, it is the alarm information. You can view the brief information of
the alarm record. System lists the three items of the intelligent alarm information. It includes
the time and detailed alarm information.
 Section 6: There are five buttons. Lock/Close/Minimize/Switch/Full menu. For
Close/Minimize/Switch button information, please refer to chapter 3.4 interface button. Click
full menu button; you can view a menu tree shown as in Figure 3-5. For detailed full menu
information, please refer to chapter 3.10.