DVR systems PSS ENG User Manual
Page 47
41
Click “Delete device” button, system will remove the selected device from the list. System will
delete the device even you just select one channel of the device. The corresponding channel in
the pane 4 of Figure 3-51 will display as N/A.
3.8.1.4 NVD operation
Right click the NVD; you can view the NVD operation menu. See Figure 3-53.
You can not see the “output task” item if current decoder has not logged in.
You can select one task, and the window information of the monitor task will be output to the
monitors of the NVD one by one.
Figure 3-53
Important
Please note one device supports only one audio talk operation. Once you have enabled audio
talk function in decode device, you can not enable audio talk in device operation.
Audio talk mode G711U is for special device only.
3.8.1.5 Non-real-time channel node and real-time channel node
Right click the non-real time monitor channel node (except NVD), you can view channel
operation channel. See Figure 3-54.
Figure 3-54
Right click the real-time monitor channel node, you can view channel operation channel. See
Figure 3-55.