DVR systems PSS ENG User Manual
Page 32
26
Figure 3-29
On the bottom right, there is a small e-map button (See Figure 3-30). You can click it to display
or hide the small e-map. System hides the button when it is to display the small e-map. You can
left click the e-map to display the button again.
System displays a red circle in the small e-map to represent the node. The green column in the
small e-map is to represent the current displayed zone.
Figure 3-30
If you have armed the camera or alarm channel, when alarm occurs, the corresponding camera
or alarm device will flash.
For detailed E-map setup and implement, please refer to chapter 3.8.5.5 E-map.
Right click mouse in the idle zone (There is no node icon.); you can see the E-map configuration
button. See Figure 3-31.
Click the E-map configuration button; you can go to chapter 3.8.5.5 E-map config.
Click the button here to display or
hide the small e-map.
Here is to represent the displayed
zone. The red icons are the nodes.