DVR systems PSS ENG - Manual (Page 75)

69
Section 1: You can see arm has four types: Motion detection/video loss/Camera
masking/External alarm.
Section 2: Here you can set the alarm arm to the corresponding channel. You need to check the
box to enable the function; otherwise you can not see the corresponding operation you set in
Global configuration
You can select corresponding setup to the specified channel.
Section 3: Apply: Click it to apply current setup.
Section 4: Alarm arm enable: You can enable this function to use alarm setup. Otherwise the
alarm setup is null.
Figure 3-96
If it is IVS version, you can see the intelligent alarm type. Please check the box to arm so that
you can see the intelligent alarm. You can see the channel that supports the intelligent alarm of
the intelligent device. Please not all the channels of one device all support the intelligent alarm.
The third channel of intelligent device in Figure 3-97 does not support the intelligent alarm.
①
②
③ ④