DVR systems PSS ENG - Manual (Page 105)

99
Figure 4-2
4.2 Monitor Task and Monitor Project
1. Pease refer to chapter 3.8.5.1 to establish task and project.
2. Please refer to chapter 3.7.1 to enable monitor task and monitor project.
4.3 PTZ Control
Before operation, please make sure current channel supports PTZ control.
Select step and then use the 8 direction buttons, you can realize PTZ control.
You can click the 3D intelligent positioning button to realize 3D intelligent positioning function.
Please note, during the whole process, other buttons are all invalid.
Click the lock icon , the PTZ interface becomes independent and can overlay the specified
screen as you desire.
You can go to chapter 3.7.5.2 Option for hotkey setup.
For detail operation information, please refer to chapter 3.8.2 and chapter 3.8.3.
Figure 4-3
4.4 Playback
4.4.1 Device Record Playback
1. Please log in the device you want to search.
2. Click playback button
3. Select the device name and then select selected channel.
4. Select record type: Record/Alarm/Motion detection/card number.
5. Set search period or cad number.
6. Click search button.
7. You can draw a circle to select the corresponding result and then click download button to
download to the local end.