DVR systems PSS ENG - Manual (Page 73)

67
Figure 3-93
3.8.5.3 Alarm Manage
Here you can set corresponding alarm setup. It includes four interfaces.
 Global configuration: Here you can set detailed arm information such as enable/disable
audio, add the alarm to the alarm record and etc.
 Arm/disarm: Here you can enable/disable arm according to the alarm type or the device
channel.
 Activation Strategy: Here you can set activation operations in the corresponding window
when the specified alarm occurs in one channel.
 Alarm information output:: Here is to output various alarm information to display.
You can go to chapter 3.7.5.2 Option to set the max alarm record amount. See Figure 3-94.
Figure 3-94
Global Configuration
Global Configuration interface is shown as in Figure 3-94.
Section 1
 Enable sound: Please draw a circle to enable sound function and then click browser button
to select corresponding sound file.
 Add to alarm manage: Display in alarm information window: You can enable this function to
add alarm message to alarm record window (Chapter 3.7.2 Alarm).
 Alarm activation has the higher priority: Please note once there is new alarm, alarm
activation video will be switched to display the new one no matter the previous alarm display
interval is over or not. You can check the box to enable current function.
Section 2 Other option
 Modify the amount of the video window when alarm activates the video: When the alarm
activation window index is more than the monitor window amount, system cam automatically
change the window amount to display the activation video. Please note this function is
①
②
③ ④