DVR systems PSS ENG User Manual

Page 52

 Video zone: It is to display the real-time video of current channel. Here you can also draw

directly to set the rule such as tripwire detect and region intrusion setup.

 Add/remove rule: "Add rule" button can add one default rule. Usually it is the first item in the

list. You can select the corresponding rule type and then draw.

 "Delete rule" button is to remove one rule from the rule list.

 Rule type: Default rule type is loitering. The rule type may vary due to different rule types.

You can rename or select the type. Then you can draw the area or redraw.

Figure 3-60

3.8.1.6 Real-time monitor

Double click one channel or you click the “main stream/extra stream” button, you can view the

real-time video in the PSS main interface. For the intelligent mode, you can view the channel rule

object trace and frame in the real-time video if your channel supports the intelligent alarm. See

Figure 3-61. The blue line is the general rule line and the red line means it triggers the alarm.

Green polygon is the object frame in the general status and the red polygon is the object frame in

the alarm status. Green trace is the object trace in the general status and the red trace is the

object trace in the alarm status when it triggers the rule.