DVR systems PSS ENG - Manual (Page 60)

54
 Video channel: You can drag the video channel on the left corner to the column here and
then release to set the video channel information.
 Add: Click it a odd current video channel tour information to the list.
 Update: Update the list to the latest information.
 Cancel: Restore the video channel information. Do not save current modification.
 Delete: Click it to delete the selected item in the list.
 Delete all: Click it to delete all the items in the list.
 Save: Save the latest setup information in the remote NVD device.
 Pause: Pause the decode tour operation of the remote NVD device.
 Resume: Restore the decode tour operation of the remote NVD device.
 Stop: Stop the decode tour operation of the remote NVD device.
 Start: Begin the decode tour operation of the remote NVD device.
Figure 3-74
You can get the decoder output via the Figure 3-74, or you can send out the monitor task to get
the decoder output. Please go to the chapter 3.8.5.1 to set monitor task first. See Figure 3-75.
Here you have set a monitor task named “Test”.