DVR systems PSS ENG - Manual (Page 76)

70
Figure 3-97
Activation Strategy
Activation interface is shown as below. See Figure 3-98.
Section 1
 Alarm device: In the alarm device list, you can view the alarm sourcing device. You can set
several activation operations for one alarm sourcing device. For example, the camera can
generates the motion detect, video loss, camera masking alarm. The alarm device can
generate the external alarm.
Section 2
 Type: You can select the activated alarm type from the dropdown list. For IVS version, you
can see the intelligent alarm item from the dropdown list. See Figure 3-99.
 Resume previous video after alarm ended: The activation alarm can open the video in the
specified window. The video stays for the specified time and then restore previous video.
 Display alarm prompt in the video window: The icon pops in current alarm window
when alarm occurs. (On the top left).
Section 3
 Channel: You can select the activated channel when alarm occurs.
 Window: You can select the monitor window serial number. The activated channel video will
be displayed in the specified window.
 Stay time(s): The activated video duration.
 Preset: If current channel connected to the PTZ, and you have set the preset, then system
can go to the specified preset once alarm occurs.
Section 4
Here you can view current existed actions. It is the alarm activation list of the channel of the
device you selected.