DVR systems PSS ENG User Manual
Page 58
52
NVD connected to. Click the four buttons at the top of the interface; you can switch the operation
type.
Operation: Go to NVD operation interface to set the video source the decoded channel
connected to.
Decode tour: Go to decode tour interface to control the tour between the decoding channels.
TV adjust: Go to TV adjust interface to set the TV output video.
The Figure 3-70 consists of five sections.
Section 1: The TV output list. One TV output stands for one NVD video output channel.
Section 2: NVD status display window and 1/4/9/16-window button. If one NVD decoded
channel is 16, then the 9-window and 16-window button are both null. If the decoded
channel is 64, then all the buttons are valid. Click the1/4/9/16-window button, you can see
the corresponding decoded channel information in current window. For example, there is a
16-channel NVD of 4 TV outputs, each TV output is corresponding to 4 decoded channels.
The first TV output is corresponding to channel 1 to channel 4. The second TV output is
corresponding to channel 5 to channel 8. The third TV output is corresponding to channel 9
to channel 12. The fourth TV output is corresponding to channel 13 to channel 16. See
Figure 3-71.
Figure 3-71
Select channel 1, you can see system switches to one window and displays the information from
the decoded channel 1. See Figure 3-72.