DVR systems PSS ENG User Manual

Page 93

After you successfully extended the Windows desktop to several monitors, the PSS will

automatically search the extension monitors and then set when it boots up. You can see the

following 4-window interface if your setup is right. See Figure 3-127.

Figure 3-127

Now you can see the extension screen on the right Device List pane. Click the node; you can see

the corresponding extension screen. See Figure 3-128.

Figure 3-128

Right click the extension screen, and then select the extension screen setup item, you can see

an interface shows as below. See Figure 3-130. Here you can set the unique name for each

extension screen.

SN: The serial number is automatically given to each extension screen when it connected to the

monitor. You need to check the box here to select current extension screen. Please note, since

PSS can maximally output to four monitors, the extension screen amount shall not be

over three. You need to reboot to activate current setup. Please note if you do not check the

box of extension screen 2, you can not see the extension screen 2 in the device list though

system can still search it. See Figure 3-129.