DVR systems PSS ENG - Manual (Page 36)

30
 Snapshot picture path: You can specify image save default path.
 Device free minimum space (MB): Once system reaches the threshold, system will overwrite
the old files automatically.
 Picture file name rule: You can specify image name rule in the dialogue box.
 Record Time (M): Please select from the dropdown list.
 Recorded file path: You can specify the file save path.
 Recorded file name rule: You can specify file name rule in the dialogue box.
 Downloaded file path: You can specify the download file
 Auto start monitor setup
 Auto start project: The project to be run.
 Project name: please input the project you wan to run automatically.
 Auto start task: The task to be run.
 Task name: Please input the task you wan to run automatically.
 Last run: The previous task and project will become active after you successfully logged in
the PSS.
 Save last monitor status: System will restore the previous monitor status when it boots up
the next time.
 Synchronization time setup
 Auto synchronizes the PC time to the device: System automatically synchronizes the time of
the front-end device.
 Sync time: You can set the time for the synchronization function operation. (Please make
sure you have enabled synchronization function.)
 Auto restart device: Once the local PC time is earlier than the front-end device time, after the
synchronization, front-end device needs to reboot to get the new time activated.
 Alarm record basic setup
 Alarm record max amount: The max record amount in the alarm record window. System
automatically overwrites the earliest record once the record is full.
 Refresh interval: Here you can specify device health status update interval. Please refer to
Chapter 3.9 device health status.
 Use pop-up window for alarm activation video: Once you check the box, system will pop up
a new window to display the alarm activation video (not in the main interface). Please refer
to chapter 3.8.4.5 alarm activation video for detail information.
 Alarm video window amount: You can specify the window amount for the pop-pup alarm
activation video window. Please refer to chapter 3.8.4.5 alarm activation video for detailed
information.
 Add disarming alarm message to the alarm record: Enable this function, system can add the
disarming alarm message to the alarm record interface. Otherwise, system only displays the
armed alarm message.
 Alarm information output port: After you checked the box here, all the alarm information from
the devices will be communicated with the peripheral applications via the port you set here.