Get boot loader/firmware version (03h), M5e-compact and m5e command responses, Boot loader commands – ThingMagic M5e-Compact User Manual
Page 67
Boot Loader Commands
Command Set
67
Get Boot Loader/Firmware Version (03h)
The Get Boot Loader command returns the Boot Loader, Hardware, and Application
version numbers. The Boot Loader, Hardware, and Application FW version numbers are
stored in flash. The Boot Loader and Hardware version numbers are each 32-bit
numbers. The application has a 96-bit version code. The command to retrieve firmware
version is shown in the following table.
M5e-Compact and M5e Command Responses
A sample response for the M5e-Compact to the command is shown in the following table:
The following information is embedded in the reply to the command:
The boot loader version is 07.09.17.00. This number is in hex format.
HW Version is 01000001. For a definition, see
.
The application firmware was compiled on 2007-October-12.
The application firmware version is 09.05.12.00. This number is in hex format.
The protocol supported by this firmware – Gen2 and ISO 18000-6C.
A sample response for the M5e to the command is shown in the following table:
FF
00
03
1D
0C
SOH
Length
OpCode
CRC
FF
14
03
00
00
07
09
17
00
01
00
00
01
20
07
10
12
09
05
12
00
SO
H
Length
OpCod
e
Status
BootLoader Ver
Hardware Ver
Firmware Date
Firmware Version
00
00
00
10
6B
CC
Supported Protocols
CRC
FF
14
03
00
00
07
09
06
00
00
00
00
03
20
07
10
04
09
05
12
00
SO
H
Length
OpCod
e
Status
BootLoader Ver
Hardware Ver
Firmware Date
Firmware Version
00
00
00
10
AD
6E
Supported Protocols
CRC