Error status codes, Blockwrite (2dh) – ThingMagic M5e-Compact User Manual
Page 144
Application Tag Commands
144
Command Set
Error Status Codes
FAULT_MSG_WRONG_NUMBER_OF_DATA – 100h
FAULT_MSG_INVALID_PARAMETER_VALUE - 105h
FAULT_NO_PROTOCOL_DEFINED – 401h
FAULT_PROTOCOL_INVALID_ADDRESS – 409h
FAULT_GENERAL_TAG_ERROR – 40Ah
FAULT_GEN2 PROTOCOL_OTHER_ERROR - 420h
FAULT_ANTENNA_NOT_CONNECTED – 503h
FAULT_TEMPERATURE_EXCEED_LIMITS – 504h
BlockWrite (2Dh)
BlockWrite is a Gen2 2.0 Optional command. On tags which support this command, it
provides faster writing of data to a tag by writing more than one word at a time.
The BlockWrite command takes the following fields:
This manual is related to the following products: