ThingMagic M5e-Compact - Manual (Page 100)

Application Tag Commands
100 Command Set
Error Status Codes
FAULT_MSG_WRONG_NUMBER_OF_DATA – 100h
FAULT_MSG_INVALID_PARAMETER_VALUE - 105h
FAULT_NO_PROTOCOL_DEFINED – 401h
FAULT_AFE_NOT_ON – 405h
FAULT_NO_TAGS_FOUND – 400h
FAULT_ANTENNA_NOT_CONNECTED – 503h
FAULT_TEMPERATURE_EXCEED_LIMITS – 504h
FAULT_HIGH_RETURN_LOSS – 505h
Write Tag Data (24h)
For the deprecated version of this command see Appendix D: Write Tag Data (24h) .
The Write Tag Data command writes to the specified memory bank and data address
location within that memory bank of a tag. The tag which will be written to can be
specified using the
Tag Singulation Fields or, if Option=0x00 of the Tag Singulation Fields is
specified, it will attempt to write to the first tag it finds. If no tag is in the field, the memory
location doesn’t exist or is unwriteable, or the Select criteria cannot be satisfied a fault
code is returned.
In addition to the Tag Singulation Fields the Write Tag Data command takes several fields
which specify the data which will be written to the tag. These fields are: