ThingMagic M5e-Compact - Manual (Page 61)

Command Set 61
Command Set
The following list defines the OpCodes that are used in the embedded modules firmware.
As these products grow, more OpCodes will be added to enhance the functionality of the
product. The timeout for the commands are in milliseconds. The maximum value for any
user-configurable timeout is 65,535msec (0xFFFF), unless otherwise noted. The
OpCodes are divided into five categories:
0x00 – 0x1F Boot Loader Commands
0x20 – 0x5F Application Tag Commands
0x60 – 0x8F Get Application Commands
0x90 – 0xBF Set Application Commands
0xC0 – 0xCF FCC Test Commands
Note
See Minimum Set of Serial Commands for the minimum startup command
sequence required to configure the module and read tags.