Rice Lake iQUBE2 Digital Diagnostic Junction Box - Manual (Page 8)

4 iQUBE 2 Installation Manual
Revolution III applications and support files are installed in C:\Program Files\Rice Lake Weighing
Systems\Revolution III; a shortcut to the program is installed in the
Start menu. When installing the iQUBE 2
module on Vista, an alert stating “This program might not have installed correctly” may appear. This is a Vista
issue. Click
This program installed correctly to complete the installation.
1.2.3 iRev 4
The iRev 4 configuration utility provides the preferred method for configuring the 920i indicator. iRev 4 runs on a
personal computer to set configuration parameters for the indicator. When iRev 4 configuration is complete,
configuration data is downloaded to the indicator. iRev 4 supports both uploading and downloading of indicator
configuration data. This capability allows configuration data to be retrieved from one indicator, edited, then
downloaded to another indicator with an identical hardware configuration. Rev E or newer boards are required for
iRev 4.
The iQUBE 2 Toolkit CD, PN 108435, is used to install iRev 4 and is included in the iQUBE 2 parts kit.
1.2.4 Supporting Indicators
The iQUBE 2 can support any indicator (such as the 720i or 820i) as a serial scale. The 920i provides special
functionality to work in conjunction with the iQUBE 2 , allowing for configuration, calibration, and diagnostics.
1.2.5 Communications Requirements
See Section 2.5 on page 9 for information about communications options for the iQUBE 2 .