Rice Lake iQUBE2 Digital Diagnostic Junction Box - Manual (Page 47)

Serial Commands 43
See Section 7.0 on page 52 for more information about data formatting commands.
Command
s = scale number Description Values
SCs.STREAM
Enable streaming for iQUBE 2
port
OFF, COM1, COM2, COM1&2
SCs.GFMT Set gross format for scale s FMT1–FMT6
SCs.NFMT Set net format for scale s FMT1–FMT6
SCs.SFMT Set stream format for scale s FMT1–FMT6
SCs.PFMT Set polling format for scale s FMT1–FMT6
FMTn Set format n specify up to 128 characters
Table 5-4. iQUBE 2 Data Formatting Commands
Command
s = scale number Description Values
SCs.GRADS Graduations 1–100 000
SCs.CAPACITY Returns calculated scale capacity
SCs.ZTRKBND Zero track band
SCs.ZRANGE Zero range
SCs.MOTBAND Motion band
SCs.OVRLOAD Overload FS+2%, FS+1D, FS+9D, FS
SCs.DFSENS Digital filter cutout sensitivity LIGHT, MEDIUM, HEAVY
SCs.DFTHRH Digital filter threshold count NONE, 10, 20, 30, 50, 100, 150, 200, 250,
500, 1000, 2500, 5000, 7500, 10000, 12500,
15000
SCs.UID Set UID of primary unit nnnnnnn
SCs.CONSNUM Consecutive numbering 1–9999999
SCs.CONSTUP Consecutive number start-up value nnnnnnn
SCs.PRI.DECPNT Primary units decimal position 8.88888, 88.8888, 888.888, 8888.88,
88888.8, 888888, 888880, 888800
SCs.PRI.DSPDIV Primary units display divisions 1D, 2D, 5D
SCs.PRI.UNITS Primary units LB, KG, OZ, TN, T, G, NONE
SCs.SEC.DECPNT Secondary units decimal position 8.88888, 88.8888, 888.888, 8888.88,
88888.8, 888888, 888880, 888800
SCs.SEC.DSPDIV Secondary units display divisions 1D, 2D, 5D
SCs.SEC.UNITS Secondary units LB, KG, OZ, TN, T, G, NONE
SCs.SEC.MULT Secondary units multiplier 0.00001–9999.99
SCs.TAREFN Tare function BOTH, NOTARE, PBTARE, KEYED
SCs.REGULAT Regulatory compliance NTEP, OIML, CANADA, NONE
SCs.NAME Scale name Scale1,scale_name (24 characters, maximum)
SCs.NCELLS Assign load cells
Order entry determines cell
pairing relationships.
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 (specify
comma-separated list of load cell numbers
associated with this platform) or NONE (to
clear load cell list)
SC5.SCALES Sets up the total scale (Scale 5)
SCs.CALMULT Calibration multiplier 1.0, number
Table 5-5. iQUBE 2 Scale Configuration Commands
Note