Dynojet 250i: Pit Installation Guide - Manual (Page 96)

In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
C H A P T E R 3
Wheel Clamp
3-18
2 Place the wheel clamp on the carriage. Align the four holes on the wheel clamp
with the holes on the carriage.
3 Secure the wheel clamp to the carriage using four 3/8-16 x 1-inch bolts,
four 5/16-inch lock washers, and four 5/16-inch flat washers.
Figure 3-20: Secure the Wheel Clamp to the Carriage
PD180