beautypg.com

Dynojet 250i: Pit Installation Guide User Manual

Page 41

background image

I N S T A L L A T I O N

Carriage Plate and Tire Carriage

Version 4

In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide

2-19

2

Use the carriage plate to mark and drill mounting holes as shown in Figure 2-14.
2a

Using the carriage plate as a template, mark and drill four 1/2-inch holes.

2b

Install the Red Head anchors. Refer to Appendix A for installation
instructions.

Figure 2-14: Carriage Plate Mounting Dimensions

3

Secure the carriage plate to the floor using four 3/8 x 1-inch bolts and
5/16-inch washers.

Figure 2-15: Install the Carriage Plate

66.04 cm

(26.0 in)

40.32 cm

(15.875 in)

PD156

This manual is related to the following products: