beautypg.com

Standard network software error [54, Standard usb port disabled [56, Supply needed to complete job – Dell B5465dnf Mono Laser Printer MFP User Manual

Page 279: Too many disks installed [58, Too many flash options installed [58

background image

Standard network software error [54]

Try one or more of the following:

From the printer control panel, touch Continue to continue printing.

Turn off the printer, and then turn it back on.

Update the network firmware in the printer or print server. For more information, contact technical support or
your Dell printer dealer.

Standard USB port disabled [56]

Try one or more of the following:

From the printer control panel, touch Continue to clear the message.

Enable the USB port. From the printer control panel, navigate to:

Network/Ports > USB Buffer > Auto

Note: The printer discards any data received through the USB port.

Supply needed to complete job

Do either of the following:

Install the missing supply to complete the job.

Cancel the current job.

Too many disks installed [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra printer hard disks.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Too many flash options installed [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra flash memory.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Troubleshooting

279