beautypg.com

Dell B5465dnf Mono Laser Printer MFP User Manual

Page 122

background image

1

Connect one end of the telephone cable that came with your printer to the port of the printer.

2

Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost
for activation of the second phone port.

3

Connect your analog telephone phone to the

port of the printer.

Notes:

To make sure that the telephone port on the cable modem is active, plug an analog telephone into the
telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.

If you need two telephone ports for your devices, but do not want to pay additional cost, then do not plug the
printer into the second telephone port. You can use a phone splitter. Plug the phone splitter into the Phone Line
1
or Phone Port, and then plug the printer and telephone into the splitter.

Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug
an analog telephone into the splitter and then listen for a dial tone.

Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the facility

1

Connect one end of the telephone cable that came with your printer to the port of the printer.

2

Connect the other end of the telephone cable to an active analog telephone wall jack.

3

Connect your analog telephone to the

port of the printer.

Faxing

122