Dell B5465dnf Mono Laser Printer MFP - Manual (Page 185)

Use To
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two
‑sided (duplex) or one‑sided, and then to
specify whether the copy should be two
‑sided or one‑sided.
Notes:
• 1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
• 1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
• 2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
• 2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Paper Saver
Off
2
‑up Portrait
2
‑up Landscape
4
‑up Portrait
4
‑up Landscape
Allow copying two or four sheets of a document on one page.
Note: Off is the factory default setting.
Print Page Borders
On
Off
Specify whether or not a border is printed.
Note: Off is the factory default setting.
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Understanding the printer menus 185