beautypg.com

Quality menu, Job accounting menu – Dell B5465dnf Mono Laser Printer MFP User Manual

Page 214

background image

Quality menu

Use

To

Print Resolution

300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q

Specify the printed output resolution in dots per inch.

Note: 600 dpi is the factory default setting.

Pixel Boost

Off
Fonts
Horizontally
Vertically
Both directions
Isolated

Enable more pixels to print in clusters for clarity, in order to enhance images horizontally
or vertically, or to enhance fonts.

Note: Off is the factory default setting.

Toner Darkness

1–10

Lighten or darken the printed output.

Notes:

8 is the factory default setting.

Selecting a smaller number can help conserve toner.

Enhance Fine Lines

On
Off

Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.

Notes:

Off is the factory default setting.

You can set this option from the printer software. For Windows users, click File >
Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
users, choose File > Print, and then adjust the settings from the Print dialog and
pop

‑up menus.

To set this option using the Embedded Web Server, type the network printer IP
address in the Web browser address field.

Gray Correction

Auto
Off

Automatically adjust the contrast enhancement applied to images.

Note: Auto is the factory default setting.

Brightness

‑6 to 6

Adjust the printed output either by lightening or darkening it. You can conserve toner
by lightening the output.

Note: 0 is the factory default setting.

Contrast

0–5

Adjust the contrast of printed objects.

Note: 0 is the factory default setting.

Job Accounting menu

Note: This menu item appears only when a formatted, working printer hard disk is installed. Make sure the printer
hard disk is not read/write

‑ or write‑protected.

Understanding the printer menus

214