Dell B5465dnf Mono Laser Printer MFP - Manual (Page 83)

Paper size 1 Dimensions Standard or
optional
550
‑sheet tray
2100
‑sheet tray Multipurpose
feeder
Duplex ADF Scanner
glass
Executive 184 x 267 mm
(7.3 x 10.5 in.)
X
Oficio (México) 216 x 340 mm
(8.5 x 13.4 in.)
Folio 216 x 330 mm
(8.5 x 13 in.)
Statement 140 x 216 mm
(5.5 x 8.5 in.)
X
Universal 105 x 148 mm to
216 x 356 mm
(4.13 x 5.83 in. to
8.5 x 14 in.)
X
70 x 127 mm to
216 x 356 mm
(2.76 x 5 in. to
8.5 x 14 in.)
X X X 3
7 3/4 Envelope
(Monarch) 98 x 191 mm
(3.9 x 7.5 in.)
X X X
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.)
X X X
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.)
X X X
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.)
X X X
C5 Envelope 162 x 229 mm
(6.38 x 9.01 in.)
X X X
B5 Envelope 176 x 250 mm
(6.93 x 9.84 in.)
X X X
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
X X X
1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes
that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact technical support.
2 Paper is supported in long
‑edge orientation.
3 Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm
(5 in.) to 356 mm (14 in.).
Paper types and weights supported by the printer
The printer engine supports 60–176
‑g/m 2 (16–47
‑lb) paper weights.
Paper and specialty media guide 83