Dell B5465dnf Mono Laser Printer MFP - Manual (Page 172)

Use To
LDAP Certificate Verification
Demand
Try
Allow
Never
Allow the user to request a server certificate.
Notes:
• “Demand” means a server certificate is requested. If a bad certificate is
provided or if no certificate is provided, then the session is terminated
immediately. “Demand” is the factory default setting.
• “Try” means a server certificate is requested. If no certificate is provided, then
the session proceeds normally. If a bad certificate is provided, then the session
is terminated immediately.
• “Allow” means a server certificate is requested. If no certificate is provided,
then the session proceeds normally. If a bad certificate is provided, then it will
be ignored, and then the session proceeds normally.
• “Never” means no server certificate is requested.
Minimum PIN Length
1–16
Limit the digit length of the PIN.
Note: 4 is the is the factory default setting.
Confidential Print menu
Use To
Max Invalid PIN
Off
2–10
Set a limit on the number of times an invalid PIN can be entered.
Notes:
• This menu item appears only when a formatted, working printer hard disk is installed.
• When the limit is reached, the print jobs for that user name and PIN are deleted.
Confidential Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Set a limit on how long the printer stores confidential print jobs.
Notes:
• If the “Confidential Job Expiration” setting is changed while confidential print jobs
reside in the printer memory or printer hard disk, then the expiration time for those
print jobs does not change to the new default value.
• If the printer is turned off, then all confidential jobs held in the printer memory are
deleted.
Repeat Job Expiration
Off
1 hour
4 hours
24 hours
1 week
Set a limit on how long the printer stores print jobs.
Note: Off is the factory default setting.
Understanding the printer menus 172