beautypg.com

Installing a printer hard disk – Dell B5465dnf Mono Laser Printer MFP User Manual

Page 39

background image

9

Attach the two provided screws to secure the ISP mounting bracket to the controller board shield.

10

Tighten the thumbscrew that is attached to the ISP.

Warning—Potential Damage: Do not screw it on too tightly.

11

Connect the ISP solution interface cable into the receptacle of the controller board.

Note: The plugs and receptacles are color-coded.

Installing a printer hard disk

Note: This task requires a flat

‑head screwdriver.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.

Additional printer setup

39