beautypg.com

Print settings – Dell B5465dnf Mono Laser Printer MFP User Manual

Page 209

background image

Use

To

Scan edge to edge

Off
On

Specify whether the original document is scanned edge-to-edge.

Note: Off is the factory default setting.

Sharpness

1–5

Adjust the amount of sharpness on a scanned image.

Note: 3 is the factory default setting.

Temperature

‑4 to 4

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
output than the default while “warm” values generate a redder output than the
default.

Print Settings

Use

To

Copies

1–999

Specify a default number of copies for each print job.

Note: 1 is the factory default setting.

Paper Source

Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope

Set a default paper source for all print jobs.

Note: Tray 1 is the factory default setting.

Collate

(1,1,1) (2,2,2)
(1,2,3) (1,2,3)

Stack the pages of a print job in sequence when printing multiple copies.

Note: “(1,2,3) (1,2,3)” is the factory default setting.

Sides (Duplex)

1 sided
2 sided

Specify whether prints are on one side or on both sides of the page.

Note: “1 sided” is the factory default setting.

Duplex Binding

Long Edge
Short Edge

Define binding for duplexed pages in relation to page orientation.

Notes:

Long Edge sets binding along the long edge of the page (left edge for portrait and top edge
for landscape). This is the factory default setting.

Short Edge sets binding along the short edge of the page (top edge for portrait and left
edge for landscape).

Paper Saver Orientation

Auto
Landscape
Portrait

Specify the orientation of a multiple

‑page document.

Notes:

Auto is the factory default setting.

This setting affects jobs if the value of the Paper Saver setting in the same menu is not set
to Off.

Understanding the printer menus

209