Supported hardware and software – Dell POWEREDGE M1000E User Manual
Page 22
xxii
Web Tools Administrator’s Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
•
Chapter 10, “Working with Diagnostic Features”
provides information about trace dumps,
viewing switch health, and interpreting the LEDs.
•
Chapter 11, “Using the FC-FC Routing Service”
provides information on using the FC-FC
Routing Service to share devices between fabrics without merging those fabrics.
•
Chapter 12, “Using the Access Gateway”
provides information on how to configure and manage
the Brocade Access Gateway.
•
Chapter 13, “Administering Fabric Watch”
provides information on how to use the Fabric Watch
feature to monitor the performance and status of switches and alert you when problems arise.
•
Chapter 14, “Administering Extended Fabrics”
provides information on how to configure a port
for long distance.
•
Chapter 15, “Administering the iSCSI Target Gateway”
provides information on how to configure
and manage the iSCSI Target Gateway.
•
provides information on how to configure routes.
•
Chapter 17, “Configuring Standard Security Features”
provides information on managing user
accounts, SNMP, and the RADIUS server.
•
Chapter 18, “Administering FICON CUP Fabrics”
provides information on how to administer and
manage FICON CUP fabrics. You can enable FMS mode, edit and create configurations, and
edit FMS parameters.
•
Chapter 19, “Configuring FCoE with Web Tools”
provides information on how to configure FCoE
features.
•
discusses limitations of and provides workarounds for using Web
Tools.
Supported hardware and software
In those instances in which procedures or parts of procedures documented here apply to some
switches but not to others, this guide identifies exactly which switches are supported and which are
not.
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS v6.4.0, documenting all possible
configurations and scenarios is beyond the scope of this document.
The following hardware platforms are supported by this release of Web Tools:
•
Brocade 300
•
Brocade 4100
•
Brocade 4900
•
Brocade 5000
•
Brocade 5100
•
Brocade 5300
•
Brocade 5410
•
Brocade 5480
•
Brocade 5424
•
Brocade 5450