Dell POWEREDGE M1000E - Manual (Page 138)

110 Web Tools Administrator’s Guide
53-1001772-01
Customizing basic monitoring graphs
8
DRAFT: BROCADE CONFIDENTIAL
The title of the dialog box varies, depending on the type of graph you are customizing, but the
layout of the dialog box is the same.
Figure 36 displays an example of the setup dialog box for
the Edit Switch Throughput Utilization graph.
FIGURE 36 Select Ports for customizing the Switch Throughput Utilization graph
You can perform the following in the dialog box:
a. Double-click the domain to expand the slot or port list.
NOTE
For the Brocade 48000, Brocade DCX and Brocade DCX 4S enterprise-class platforms,
click the plus (+) signs to expand the ports under each slot, as shown in
Figure 36 .
b. Click the port you want to monitor in the graph in the Port Selection List.
Use Shift+click and Ctrl+click to select multiple ports.
c. Click Add to move the selected ports to the Selected Ports list.
d. Optional: Click ADD ALL Ports to add all of the ports in the Port Selection List to the
Selected Ports list.
e. Optional: Click Search to open the Search Port Selection List dialog box, from which you
can search for all E_Ports, all F_Ports, or all port names with a defined string. Select the
ports you want to add and click Search in the Search Port Selection List dialog box.