Dell POWEREDGE M1000E - Manual (Page 159)

Web Tools Administrator’s Guide 131
53-1001772-01
Zone configuration and zoning database management
9
DRAFT: BROCADE CONFIDENTIAL
7. Optional: Repeat steps 5 and 6 to add more elements to your TI zone.
8. When you are finished, click OK. The Traffic Isolations Zones window displays.
9. Click Apply to save the TI zone configuration.
Zone configuration and zoning database management
A zone configuration is a group of zones; zoning is enabled on a fabric by enabling a specific
configuration. You can specify members of a configuration using zone names.
Figure 38 displays a sample zoning database and the relationship between the zone aliases,
zones, and zoning configuration. The database contains one zoning configuration, myconfig, which
contains two zones: Zone A and Zone B. The database also contains four aliases, which are
members of Zone A and Zone B. Zone A and Zone B also have additional members other than the
aliases.
FIGURE 38 Sample zoning database
Creating zone configurations
Use the following procedure to create a zone configuration. After creating a zone configuration, you
must explicitly enable it for it to take effect.
For information on enabling the configuration, refer to “Enabling zone configurations” on page 134.
Zone Configuration: myconfig
WWN 5
Alias 3
WWW 5; WWN 6; WWN7
Alias 4
Zone B
Other Elements
WWW 9
WWN 1; WWN 2; WWN 3
Alias 1
WWN 4;
Alias 2
Zone A
Other Elements