Dell POWEREDGE M1000E - Manual (Page 254)

226 Web Tools Administrator’s Guide
53-1001772-01
RADIUS management
17
DRAFT: BROCADE CONFIDENTIAL
The RADIUS Configuration dialog box displays. You can configure up to five RADIUS servers. If
five RADIUS servers are already configured, the Add button is disabled.
4. Enter the RADIUS server name, as a valid IP address (in either IPv4 or IPv6 format) or Dynamic
Name Server (DNS) string.
Each RADIUS server must have a unique IP address or DNS name for the RADIUS server.
5. Enter the port number.
6. Enter the secret string.
7. Enter the timeout time in minutes.
8. Select either CHAP or PAP as the authentication protocol.
The default value is CHAP, and if you do not change it, CHAP becomes the authentication
protocol.
9. Click OK to return to the AAA Service tab.
10. Click Apply.
Modifying the RADIUS server
Use the following procedure to change the parameters of a RADIUS server that is already
configured.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 35.
2. Select the AAA Service tab.
3. Select a RADIUS server from the RADIUS Configuration list.
4. Click Modify.
The RADIUS/ADLDAP Configuration dialog box displays.
5. Enter new values for the port number, timeout time (in minutes), and secret string.
6. Select either CHAP or PAP as the authentication protocol.
The default value is CHAP, and if you do not change it, CHAP becomes the authentication
protocol.
7. Click OK to return to the AAA Service tab.
8. Click Apply.
Modifying the RADIUS server order
The RADIUS servers are contacted in the order they are listed, starting from the top of the list and
moving to the bottom.
Use the following procedure to modify the RADIUS server order.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 35.
2. Select the AAA Service tab.
3. Select a RADIUS server from the RADIUS Configuration list.