Dell C7765DN MFP Color Laser Printer - Manual (Page 662)

23 Problem Solving
662
033-528 [Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-529 [Cause] An error occurred during fax transmission.
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530 [Cause] Received a procedure disabled signal.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-531 [Cause] Received a command rejection signal.
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-532
033-533
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-534 [Cause] The other machine does not offer a feature to print the number of document sets sent.
[Remedy] Do not specify multiple sets.
033-535 [Cause] An error occurred during fax transmission.
[Remedy] Confirm information such as the recipient and folder information, and execute the
operation again.
033-536
033-537
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.
033-538
033-539
033-540
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
at dell.com/contactdell.
033-541 [Cause] The recipient is not specified.
[Remedy] Specify the recipient correctly.
033-543 [Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.
033-544 [Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
033-546 [Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547 [Cause] Communication was terminated by a cause such as pressing the button.
[Remedy] No measure is required.
033-548 [Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549 [Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550 [Cause] Cannot execute another job because fax communication is in progress.
[Remedy] Wait until the job being communicated completes, and then execute the operation
again.
Status Code Cause and Remedy