Dell C7765DN MFP Color Laser Printer - Manual (Page 180)

7 Stored Programming
180
• If the Fax service is available, one-touch buttons can be used.
Registering Stored Programs for Build Job
Up to 100 actions can be registered with one stored program for Build Job. Up to 40 stored
programs can be registered in the machine.
The following describes how to register actions with stored programs.
1
Select [Store Build Job].
Note • Once a job is stored to a button, it cannot be
overwritten.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
2
Select a number to register a stored program.
Note • Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [ ] to move to the next screen.
3
Set the feature you want to register.
Note • The machine sounds an audible tone while a stored program is being registered.
• Press the button to cancel registration.
You can change the volume of the sound that notifies that a stored program is being registered. For
information on the settings, refer to "Stored Programming Tone" (P.319).
4
Press the or button.
Note • An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes “(No Name)”.
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.181).
Deleting Stored Programs
The following describes how to delete stored programs.
1
Select [Delete].
2
Select the number to delete.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.