Dell C7765DN MFP Color Laser Printer - Manual (Page 110)

3 Copy
110
Booklet Creation (Creating a Booklet)
This feature allows you to layout the copied pages so that they will be in the right order when
folded and bound as a booklet. You can also shift the pages for binding and add covers.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, you can also crease the
output sheets in half, or staple the creased output sheets.
Note • Ensure that the actual orientation of the original document matches the [Original Orientation] setting
on the [Layout Adjustment] screen.
• When the Finisher-B1 is installed, do not remove outputs from the finisher tray until all the output
sheets have been delivered.
• The machine copies four pages of the document onto one sheet of paper. If the number of pages in the
booklet is not a multiple of four, the remaining pages will be output as blank pages.
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically
selected. Change the setting if necessary. For information on [Auto Paper Off], refer to "Copy Control"
(P.354).
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Select [Booklet Creation] on the [Output
Format] screen.
3
Select any option.
Off
Disables this feature.
Create Left / Top Bound Booklet
Copies are made to enable left binding or top binding.
Create Right Bound Booklet
Copies are made to enable right binding.