LaMotte SMART Spectro Spectrophotometer - Manual (Page 86)

CHLORIDE, TESTAB
ARGENTOMETRIC TESTAB METHOD • CODE 3693-SC
QUANTITY CONTENTS CODE
50 *Chloride Spectrophotometric Grade Tablets *3885A-H
1 Tablet Crusher 0175
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents
go to www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail,
phone or fax.
Chloride is one of the major anions found in water and sewage. The presence of
chlorides in large amounts may be due to the natural process of water passing
through salt formations in the earth, or it may be evidence of the intrusion of
seawater or pollution from industrial processes or domestic wastes. The salt
content of water affects the distribution of plant and animal life in an aquatic
system, based on the amount of salt they can tolerate.
APPLICATION: Drinking, surface, and saline waters; domestic and
industrial wastewaters.
RANGE: 0.0–30.0 ppm Chloride
MDL: 0.5 ppm
METHOD: Silver nitrate reacts with chloride to form turbid silver
chloride in proportion to the amount of chloride in the
sample.
SAMPLE HANDLING
& PRESERVATION:
Collect samples in clean, chemically-resistant glass or
plastic containers. No preservative is needed if sample is
to be stored.
INTERFERENCES: Substances in amounts normally found in drinking water
will not interfere. Bromide, iodide, cyanide, sulfi de,
thiosulfate, sulfi de and orthophosphate will interfere.
SMART Spectro Test Procedures 2.11 CHLORIDE, TesTab
Test P
rocedures