LaMotte SMART Spectro Spectrophotometer - Manual (Page 27)

SMART Spectro Operator’s Manual 2.11 27
GENERAL TESTING PROCEDURES
The following are some step by step examples of how to run tests from the
PROGRAMMED TESTS menu. These test procedures are designed to be used
with LaMotte SMART Spectro reagent systems.
 TESTING WITH THE LaMOTTE PROGRAMMED TESTS
1. Press ON. The LaMotte logo
screen will appear for about 2
seconds and the MAIN MENU will
appear.
MAIN MENU 12:00:01
* CALIBRATE WL
PROGRAMMED TESTS
%T/ABS
PC LINK
2. Press or to scroll to
PROGRAMMED TESTS.
MAIN MENU 12:00:01
CALIBRATE WL
* PROGRAMMED TESTS
%T/ABS
PC LINK
3. Press *ENTER to select
PROGRAMMED TESTS.
PROGRAMMED TESTS
* SEQUENCE 1
SEQUENCE 2
SEQUENCE 3
ALL TESTS
4. Press to scroll t o ALL
TESTS.
PROGRAMMED TESTS
SEQUENCE 1
SEQUENCE 2
SEQUENCE 3
* ALL TESTS