LaMotte SMART Spectro Spectrophotometer - Manual (Page 38)

38 SMART Spectro Operator’s Manual 2.11
4. Select the characters in the name
one at a time, from left to right. In
this example the new test name will
be H2O. Press to scroll right
to the fi rst character. Selection of
characters is controlled by moving
the curser over the top of the letter
to be chosen. Press *ENTER with
the curser over the character to
select it. The character will appear
now in the line next to the test
number. Continue in this fashion
until entire name is entered. Press
EXIT to delete/erase any incorrect
entry and start over. Select ! at
the end of the name to save the
name. The display will return to the
NAME THE TEST menu. Select
KEEP to save the name and return
to the User Test menu. Note that
the 102 is named H2O.
102 H2O
* NAME THE TEST
SELECT WL
NEW CALIBRATION
FORMAT RESULT